Barbed Wire Weight per Meter: IS 278 Chart, Gauges and Fence Calculator

Coils of galvanized barbed wire showing twisted line wires and evenly spaced barbs, used to check barbed wire weight per meter

Galvanized barbed wire reels. Divide reel weight by length and compare with the IS 278 chart.

The barbed wire weight per meter for standard galvanized barbed wire in India ranges from about 78 g to 155 g per metre, depending on the wire thickness and how far apart the barbs are. The most common "12 x 14 gauge" wire (2.50 mm line wire, 2.00 mm point wire) weighs 108 to 125 g/m with barbs every 75 mm, and 89 to 103 g/m with barbs every 150 mm. These limits come from Table 1 of IS 278:2009, the Indian Standard for galvanized steel barbed wire. Below is the full chart, metres per kg, a quick way to work out how much wire your fence needs, and how to check that a reel is not underweight.

Barbed Wire Weight Chart as per IS 278:2009

IS 278 lists six size designations. Each one fixes the line wire diameter, the point (barb) wire diameter, the barb spacing and a minimum and maximum mass of the finished barbed wire in grams per metre. The standard works this out by dividing the total mass of a reel by its length.

IS 278 sizeLine wire (mm)Point wire (mm)Barb spacing (mm)Min weight (g/m)Max weight (g/m)
12.502.5075136155
22.502.50150108120
32.502.0075108125
42.502.0015089103
52.242.007597106
62.242.001507885

Wire diameter tolerance is ±0.08 mm and barb spacing tolerance is ±12 mm for every size. There are 2 to 7 twists (lays) between two barbs.

Barbed Wire Metres per Kg and Weight per 100 m

Buyers usually think the other way round: "how many metres do I get in one kg?" The table below converts the IS 278 limits. A heavier wire gives fewer metres per kg.

IS 278 sizeCommon trade name (approx.)Metres per kgWeight of 100 m (kg)Weight of 1,000 m (kg)
112 x 12 gauge, 75 mm barbs6.5 - 7.413.6 - 15.5136 - 155
212 x 12 gauge, 150 mm barbs8.3 - 9.310.8 - 12.0108 - 120
312 x 14 gauge, 75 mm barbs8.0 - 9.310.8 - 12.5108 - 125
412 x 14 gauge, 150 mm barbs9.7 - 11.28.9 - 10.389 - 103
513 x 14 gauge, 75 mm barbs9.4 - 10.39.7 - 10.697 - 106
613 x 14 gauge, 150 mm barbs11.8 - 12.87.8 - 8.578 - 85

The metre and kg columns are simple conversions of the IS 278 g/m limits, rounded to one decimal place.

What does "12 x 14 gauge" mean?

Traders describe barbed wire by two gauge numbers: the first is the line wire, the second is the point wire that forms the barbs. A lower gauge number means a thicker wire. IS 278 itself uses millimetres, not gauges, and the trade names are only a rough match. On the SWG scale, 12 gauge is 2.64 mm and 14 gauge is 2.03 mm, so the IS 278 sizes of 2.50 mm and 2.00 mm are usually sold as "12 x 14". The 2.24 mm line wire sits closest to 13 gauge. Because gauge names vary between sellers, always ask for the diameter in mm and the barb spacing, which are the figures the standard checks.

Why Barbed Wire Weight Changes

Three things decide how heavy a metre of barbed wire is:

  • Line wire thickness. Barbed wire has two line wires twisted together, so a thicker line wire adds weight twice. A single 2.50 mm steel wire weighs about 38.5 g/m, so two of them are about 77 g/m before any barbs are added.
  • Barb spacing. Barbs every 75 mm means twice as many barbs as 150 mm spacing. That is why sizes 1, 3 and 5 are clearly heavier than sizes 2, 4 and 6 even with the same wires.
  • Point wire thickness and zinc coating. A 2.50 mm point wire makes heavier barbs than a 2.00 mm one. The zinc layer adds a little weight too, more for heavy-coated wire than medium-coated.

You can check the bare steel part yourself with the standard round-wire formula: weight (kg/m) = d² x 0.00617, where d is the wire diameter in mm. It is the same formula used for TMT bars, explained in our TMT bar weight chart.

How to Calculate Barbed Wire for a Fence

Use this simple method to estimate the wire you need:

  1. Measure the fence line in metres (the full perimeter, or the total length of the sides you are fencing).
  2. Multiply by the number of strands (rows of wire) you plan to run between posts.
  3. Add 5 to 10 percent for tensioning, wrapping around end posts, gates and corners.
  4. Multiply the total metres by the weight per metre from the chart above to get the weight in kg.

Worked example

A farm plot has a 200 m boundary and needs 5 strands. That is 200 x 5 = 1,000 m, plus 10 percent extra = 1,100 m of wire.

Wire chosenWeight per metreTotal for 1,100 m
IS 278 size 3 (12 x 14, 75 mm barbs)108 - 125 g/mabout 119 - 138 kg
IS 278 size 4 (12 x 14, 150 mm barbs)89 - 103 g/mabout 98 - 113 kg
IS 278 size 6 (13 x 14, 150 mm barbs)78 - 85 g/mabout 86 - 94 kg

Barbed wire is sold by weight, so this kg figure is what your quote will be based on. For posts and supports, see our guides to GI angle sizes and the MS angle weight chart, which are common choices for fence posts.

Type A vs Type B Barbed Wire

IS 278 covers two types. Both have four-point barbs made by twisting two point wires, two turns each.

FeatureType A (Iowa type)Type B (Glidden type)
How the barb is woundAround both line wiresAround one line wire
Barb gripBarbs are locked between both wires, so they slide lessBarbs sit on one wire, simpler to make
Barb length (both types)13 mm to 18 mm, point cut at no more than 35 degrees

A wire is described by type and size, for example "Steel Barbed Wire, A-1 IS 278" means Type A, size 1.

Other IS 278 Requirements Worth Knowing

  • Material: mild steel wire as per IS 280.
  • Galvanizing: hot-dip coating to IS 4826 (medium or heavy, as agreed) or electro-galvanized coating to IS 12753. Hot-dip heavy coating lasts longest outdoors.
  • Strength: line wire tensile strength 390 to 590 N/mm². The finished barbed wire must take a breaking load of at least 3.7 kN for 2.50 mm line wire and 3.0 kN for 2.24 mm.
  • No splices: line wire must be continuous, with any welds at least 15 m apart.
  • Marking: every reel should show the maker's name, type, line and point wire diameters, barb spacing and the length or mass of the reel.

How to Check a Barbed Wire Reel Before You Pay

Underweight or thin wire is the most common complaint with barbed wire. A few quick checks protect you:

  • Weigh and measure. Divide the reel weight (in grams) by its length (in metres). Compare the answer with the min-max range for that size in the chart above.
  • Measure the wire. Use a vernier or micrometer on the line wire and a barb. 2.50 mm wire should read between 2.42 and 2.58 mm.
  • Check barb spacing. Measure 10 gaps and take the average. It should be within ±12 mm of 75 or 150 mm.
  • Look at the zinc. It should be even and bright, with no bare or rusty patches.
  • Read the reel tag and match it with the invoice, and ask for the weighbridge slip for bulk orders.

Vishwa Geeta Ispat supplies barbed wire along with GI wire and concertina coil for boundary and security fencing. Every bulk order is billed on actual weighbridge weight.

Frequently Asked Questions

What is the weight of 1 metre of barbed wire?

Under IS 278, one metre of galvanized barbed wire weighs between 78 g and 155 g depending on size. The popular 12 x 14 gauge wire weighs 108 to 125 g per metre with 75 mm barb spacing, and 89 to 103 g per metre with 150 mm spacing.

How many metres of barbed wire are in 1 kg?

About 6.5 to 12.8 metres, depending on the size. For 12 x 14 gauge wire you get roughly 8 to 9.3 metres per kg with 75 mm barbs and 9.7 to 11.2 metres per kg with 150 mm barbs.

What is the weight of 12 x 14 gauge barbed wire per metre?

12 x 14 gauge is usually sold as the IS 278 sizes with a 2.50 mm line wire and a 2.00 mm point wire. That wire weighs 108 to 125 g/m with barbs every 75 mm (size 3) and 89 to 103 g/m with barbs every 150 mm (size 4).

How do I calculate how much barbed wire I need?

Multiply the fence length in metres by the number of strands, add 5 to 10 percent for wastage and wrapping, then multiply by the weight per metre from the IS 278 chart. For example, 1,100 m of size 4 wire weighs about 98 to 113 kg.

Which Indian Standard covers barbed wire?

IS 278:2009, "Galvanized Steel Barbed Wire for Fencing - Specification". It sets the six sizes, the weight limits per metre, barb length and spacing, zinc coating, tensile strength and the marking needed on each reel.

Why is my barbed wire lighter than the chart?

The wire may be thinner than stated, have wider barb spacing, or carry a lighter zinc coat. Divide the reel weight by its length and compare with the IS 278 minimum for that size. If it falls below, ask the seller to explain before you pay.

Planning a boundary or farm fence?
Send us the fence length, number of strands and the wire size you want. Vishwa Geeta Ispat will work out the quantity and reply with today's delivered rate, billed on a weighbridge.

Vishwa Geeta Ispat — Central India’s trusted steel partner since 1960. Genuine stock, transparent live rates and weighbridge-verified dispatch.

 © 2026 Vishwa Geeta Ispat. All rights reserved.  |  GSTIN 22AASFV6609C1Z4

1 · Product

2 · Dimensions

3 · Weight Result

Weight / Meter
–
Weight / Piece
–
Total Weight
–

4 · Estimated Freight

Enter manually for now
Editable estimate
Est. Freight
–₹
Freight is a rough estimate — actual cost depends on vehicle type, load consolidation, and current fuel price. Confirm the exact figure via WhatsApp before ordering.