NPB Beam: Size Chart, Weight per Metre and What the Name Means

NPB beam stack: narrow parallel flange I-beams with their I-shaped cut ends in a steel yard

Narrow parallel flange (NPB) beams. Check the depth, flange width and kg/m against the IS 12778 chart.

An NPB beam is an Indian Standard Narrow Parallel Flange Beam, a hot rolled I-section covered by IS 12778:2004. Its inner flange faces are parallel (not tapered like ISMB) and its flange is narrower than its depth, so it is used mainly as a beam. The name tells you the size: NPB 300 x 150 x 36.52 means 300 mm nominal depth, 150 mm nominal flange width and 36.52 kg per metre. The standard lists 70 NPB sections, from NPB 100 x 55 x 8.10 up to NPB 750 x 270 x 202.48. The full NPB beam size chart with weight, depth, flange width and thicknesses is below.

What Is an NPB Beam?

IS 12778 sorts parallel flange sections into three families:

  • NPB - Narrow Parallel Flange Beams. Flange width is generally lower than the depth. Used mainly as beams (floor beams, roof beams, purlin supports, crane girders in light sheds).
  • WPB - Wide Parallel Flange Beams. Flange width equal to the depth up to 300 mm depth, and 300 to 400 mm wide for deeper sections. Used as beams or columns.
  • PBP - Parallel Flange Bearing Piles. Web and flanges of the same nominal thickness, with depth and width almost equal. Used as bearing piles.

All three are doubly symmetric, and the code says each nominal size is rolled in light, medium and heavy versions with different web and flange thicknesses. That is why the chart shows two or three weights for most sizes, for example three different NPB 300 x 150 beams.

If you are new to beam types, our guide to I beam sizes covers the tapered-flange ISMB, ISLB and ISJB range, and H beam vs I beam explains when a wider flange makes sense.

How to Read an NPB Designation

Every NPB section is named NPB depth x flange width x mass:

PartExample (NPB 300 x 150 x 36.52)Meaning
NPBNPBNarrow Parallel Flange Beam (full symbol ISNPB)
First number300Nominal depth in mm
Second number150Nominal flange width in mm
Third number36.52Mass in kg per metre

The depth and width are nominal. Heavier versions of the same size are rolled slightly deeper or wider. For example, the three NPB 300 x 150 sections are actually 297, 300 and 304 mm deep. When you order, always quote the full designation including the mass, because "NPB 300" alone can mean any of nine sections (300 x 150, 300 x 165 or 300 x 200, each in three weights).

NPB Beam Size Chart and Weight per Metre (IS 12778)

This table lists all 70 narrow parallel flange beams in Table 1 of IS 12778:2004 with mass in kg/m, actual depth (D), flange width (B), web thickness (t) and flange thickness (T), all in millimetres. We checked each row: the listed mass matches the steel area worked out from these dimensions at 7,850 kg/m³.

DesignationWeight (kg/m)Depth D (mm)Flange width B (mm)Web thickness t (mm)Flange thickness T (mm)
NPB 100 x 55 x 8.108.10100554.15.7
NPB 120 x 60 x 10.3710.37120644.46.3
NPB 140 x 70 x 12.8912.89140734.76.9
NPB 160 x 80 x 15.7715.77160825.07.4
NPB 180 x 90 x 15.3715.37177914.36.5
NPB 180 x 90 x 18.8018.80180915.38.0
NPB 180 x 90 x 21.2721.27182926.09.0
NPB 200 x 100 x 18.4218.421971004.57.0
NPB 200 x 100 x 22.3622.362001005.68.5
NPB 200 x 100 x 25.0925.092021026.29.5
NPB 200 x 130 x 27.3727.372071335.88.5
NPB 200 x 130 x 31.5531.552101346.410.0
NPB 200 x 150 x 30.4530.451941506.09.0
NPB 200 x 165 x 35.6835.682011656.210.0
NPB 200 x 165 x 42.4742.472051667.212.0
NPB 200 x 165 x 48.0048.002101666.514.5
NPB 220 x 110 x 22.1822.182171105.07.7
NPB 220 x 110 x 26.2026.202201105.99.2
NPB 220 x 110 x 29.3529.352221126.610.2
NPB 240 x 120 x 26.1526.152371205.28.3
NPB 240 x 120 x 30.7130.712401206.29.8
NPB 240 x 120 x 34.3134.312421227.010.8
NPB 250 x 125 x 30.1130.112501256.09.0
NPB 250 x 150 x 34.0834.082581466.19.2
NPB 250 x 150 x 39.7839.782621476.611.2
NPB 250 x 150 x 46.4846.482661487.613.2
NPB 250 x 175 x 43.9443.942441757.011.0
NPB 270 x 135 x 30.7330.732671355.58.7
NPB 270 x 135 x 36.0736.072701356.610.2
NPB 270 x 135 x 42.2642.262741367.512.2
NPB 300 x 150 x 36.5236.522971506.19.2
NPB 300 x 150 x 42.2442.243001507.110.7
NPB 300 x 150 x 49.3249.323041528.012.7
NPB 300 x 165 x 39.8839.883101655.89.7
NPB 300 x 165 x 45.7645.763131666.611.2
NPB 300 x 165 x 53.4653.463171677.613.2
NPB 300 x 200 x 59.5659.563032037.513.1
NPB 300 x 200 x 66.7566.753062048.514.6
NPB 300 x 200 x 75.3775.373102059.416.6
NPB 330 x 160 x 42.9742.973271606.510.0
NPB 330 x 160 x 49.1549.153301607.511.5
NPB 330 x 160 x 57.0057.003341628.513.5
NPB 350 x 170 x 50.2150.21357.61706.611.5
NPB 350 x 170 x 57.0957.093601708.012.7
NPB 350 x 170 x 66.0466.043641729.214.7
NPB 350 x 250 x 79.1879.183402509.014.0
NPB 400 x 180 x 57.3857.383971807.012.0
NPB 400 x 180 x 66.3066.304001808.613.5
NPB 400 x 180 x 75.6675.664041829.715.5
NPB 400 x 200 x 67.2867.284002008.013.0
NPB 450 x 190 x 67.1567.154471907.613.1
NPB 450 x 190 x 77.5777.574501909.414.6
NPB 450 x 190 x 92.3692.3645619211.017.6
NPB 500 x 200 x 79.3679.364972008.414.5
NPB 500 x 200 x 90.6890.6850020010.216.0
NPB 500 x 200 x 107.31107.3150620212.019.0
NPB 550 x 210 x 92.0792.075472109.015.7
NPB 550 x 210 x 105.52105.5255021011.117.2
NPB 550 x 210 x 122.52122.5255621212.720.2
NPB 600 x 220 x 107.56107.565972209.817.5
NPB 600 x 220 x 122.45122.4560022012.019.0
NPB 600 x 220 x 154.46154.4661022415.024.0
NPB 700 x 250 x 113.45113.456942509.016.0
NPB 700 x 250 x 128.41128.4169525011.516.5
NPB 700 x 250 x 143.42143.4270025012.519.0
NPB 700 x 250 x 153.86153.8670425013.021.0
NPB 700 x 250 x 171.47171.4770925014.523.5
NPB 750 x 270 x 145.29145.2975026513.216.6
NPB 750 x 270 x 174.54174.5476027014.421.6
NPB 750 x 270 x 202.48202.4877027015.626.6

Section properties such as moment of inertia, section modulus and radius of gyration for each size are given in the same table of IS 12778. Your structural engineer will choose the section from those values. This chart is for identifying, ordering and weighing beams. Not every size is rolled regularly in India, so check stock before you finalise a design around an uncommon section.

How to Work Out the Weight of an NPB Beam Order

Steel beams are usually sold by weight, so convert your cutting list into kilograms before you ask for a quote:

Total weight (kg) = weight per metre (kg/m) x length (m) x number of pieces

Example: 8 pieces of NPB 300 x 150 x 42.24, each 12 m long, weigh 42.24 x 12 x 8 = 4,055 kg, or about 4.06 tonnes.

Example: 20 pieces of NPB 200 x 100 x 22.36 at 6 m each weigh 22.36 x 6 x 20 = 2,683 kg.

The real weighbridge weight can differ slightly from this theoretical figure because IS 12779 allows small rolling tolerances on size and mass. A large shortfall usually means a lighter section was supplied, so check the designation on the mill test certificate and measure the flange thickness with a vernier on delivery. Our guide on I beam weight charts has more on checking weights at site.

NPB vs ISMB vs IPE vs WPB

SectionStandardFlange shapeTypical use
NPBIS 12778Parallel inner faces, flange narrower than depthBeams in buildings, sheds, mezzanines, industrial frames
ISMB / ISLB / ISJBIS 808Tapered (sloping) inner facesGeneral beams, the traditional Indian I-beam range
IPEEuropean standardParallel inner facesEuropean-designed projects; very close to the standard-weight NPB sizes
WPBIS 12778Parallel, wide flangeColumns and heavily loaded beams

Why engineers pick parallel flange beams: the flange is the same thickness across its width, so bolts sit flat without tapered washers, welding is simpler, and the range offers several weights per depth, so the designer can choose a lighter section that still does the job. For columns or where you need more strength sideways, a wider section such as WPB or an H-beam is usually chosen instead. See our H beam size chart for those.

Steel Grade, Tolerances and Buying Checks

  • Grade: IS 12778 refers to IS 2062 for mild structural steel (for example E250) and IS 8500 for medium and high strength micro-alloyed steel. State the grade on your order.
  • Tolerances: rolling and cutting tolerances for parallel flange sections are set by IS 12779.
  • Documents: ask for the mill test certificate with the heat number, and match the designation and grade printed on it to your order.
  • On delivery: measure depth, flange width and flange thickness at a few points and compare them with the chart. Weigh the load on a weighbridge and compare it with the theoretical weight.
  • Length: confirm the supply length (commonly 12 m for beams) and whether cutting to size is needed before dispatch.

Frequently Asked Questions

What is an NPB beam?

An NPB beam is an Indian Standard Narrow Parallel Flange Beam covered by IS 12778. It is an I-shaped hot rolled section whose inner flange faces are parallel, with a flange narrower than the depth. It is mainly used as a beam in buildings, sheds and industrial structures.

What is the full form of NPB?

NPB stands for Narrow Parallel flange Beam. In IS 12778 the full symbol is ISNPB, which replaced the older IPN-style naming. The related symbols are WPB for wide parallel flange beams and PBP for parallel flange bearing piles.

How do you read an NPB designation like NPB 300 x 150 x 36.52?

The three numbers are the nominal depth in mm, the nominal flange width in mm and the mass in kg per metre. So NPB 300 x 150 x 36.52 is a 300 mm deep beam with a 150 mm wide flange that weighs 36.52 kg/m. The actual depth can differ a little from the nominal value.

What is the difference between NPB and ISMB?

Both are I-sections used as beams. ISMB sections (IS 808) have sloping, tapered inner flange faces, while NPB sections (IS 12778) have parallel flanges of even thickness. Parallel flanges make bolted and welded connections simpler, and NPB comes in several weights for each nominal size.

Is NPB the same as IPE?

NPB sections are the Indian parallel flange equivalent of the European IPE range, and the standard-weight NPB sizes have very similar dimensions. For example, NPB 200 x 100 x 22.36 and IPE 200 share the same 200 x 100 mm profile. Always design and order with the IS 12778 designation.

Which steel grade is used for NPB beams?

IS 12778 says the material should conform to IS 2062 for mild structural steel, or IS 8500 for medium and high strength steel. Ask the mill test certificate (MTC) to confirm the grade, such as E250 or E350, for your lot.

Need NPB or other structural beams?
Send us the designation, length and quantity. Vishwa Geeta Ispat will check stock and reply with today's delivered rate, billed on a weighbridge.

Vishwa Geeta Ispat — Central India’s trusted steel partner since 1960. Genuine stock, transparent live rates and weighbridge-verified dispatch.

 © 2026 Vishwa Geeta Ispat. All rights reserved.  |  GSTIN 22AASFV6609C1Z4

1 · Product

2 · Dimensions

3 · Weight Result

Weight / Meter
–
Weight / Piece
–
Total Weight
–

4 · Estimated Freight

Enter manually for now
Editable estimate
Est. Freight
–₹
Freight is a rough estimate — actual cost depends on vehicle type, load consolidation, and current fuel price. Confirm the exact figure via WhatsApp before ordering.